Procedures

From ITPWiki

Jump to: navigation, search

What will we do in each trial connection?

What data will we collect?

FLS Pegboard task:

Here are some approximate measurements from a pegboard.

Base: 102.53mm(4.0365in) x 63.72mm(2.509in) x 12.55mm(.494in)

Pegs: 3.24mm(.127in) diameter x 28.50mm(1.122in) exposed (need to be longer to fit into the base)

Diagram with peg numbering: +------------------------+ | 6 | | 6 3 | | 5 3 | | 5 2 | | 4 2 | | 4 1 | | 1 | +------------------------+

Peg spacing on the left (3 rows, 2 columns): 27.22mm(1.0715in) center-to-center between columns 17.47mm(.688in) center-to-center between rows Upper right peg (#6) center is 12.15mm(.4785in) from the left edge of the base and 11.79mm(.464in) from the top edge of the base

Peg spacing on the right (hexagon)

  1. 1 25.44mm(1.0015in) from right edge x 5.63mm(.2215in) from bottom edge
  2. 2 7.63mm(.3005in) from right edge x 19.70mm(.7755in) from bottom edge
  3. 3 7.63mm(.3005in) from right edge x 21.29mm(.838in) from top edge
  4. 4 41.84mm(1.647in) from right edge x 19.70mm(.7755in) from bottom edge
  5. 5 41.84mm(1.647in) from right edge x 21.29mm(.838in) from top edge
  6. 6 25.44mm(1.0015in) from right edge x 6.22mm(.245in) from top edge

Blocks: Average block height is 15.42mm(.6075in)

Personal tools